Monthly Archives: May 2013

Replacing the rear shock absorber – Fiat Uno

■ Loosen the rear wheel bolts, do not remove the wheel yet.

■ Unscrew the upper shock absorber fastening on the luggage compartment side.

■ Raise … read on

REAR SUSPENSION – Fiat Uno

The rear suspension consists of a torsionally steel beam, to which the longitudinal arms are welded. The rocker beam is attached … read on

Wheel bearing replacement

Front wheel bearing, which is loud or has a lot of slack. needs to be replaced. It is recommended to replace the bearing together with the hub, because it's a simpler repair and no … read on

Demolition of the suspension – Fiat Uno

■ Clamp the suspension strut in a vice near the steering knuckle arm.

■ Disconnect the crossover from the column.

■ Unscrew the brake caliper.

■ Unscrew the brake disc from the hub … read on

FRONT SUSPENSION

The front suspension of the Fiat Uno consists of Mc Pherson struts and lower wishbones attached to the support beam, which in turn is bolted to the body.

Column … read on

The gearbox and main gear form one unit, with which the driveshafts are closely related. The box is delivered in four versions- and five-speed gears. The basic structure of both crates is the same, with this … read on

Clutch repair

Use force to exert pressure 85 kG (85 daN) on the diaphragm spring, which should move the release bearing by 8 mm and the pressure ring by at least 1.4 mm .… read on