Ford

Wheel bearing replacement

Front wheel bearing, which is loud or has a lot of slack. needs to be replaced. It is recommended to replace the bearing together with the hub, as it is a simpler repair and requires no special tools (the clamping nut of the outer ring of the bearing has an inner hexagon).

■ Wymontować kolumnę zawieszenia … read on

Demolition of the suspension – Fiat Uno

■ Clamp the suspension strut in a vice near the steering knuckle arm.

■ Disconnect the crossover from the column.

■ Unscrew the brake caliper.

■ Unscrew the brake disc from the hub and remove it

■ Unscrew the metal cover of the brake disc from the steering knuckle.

■ Odkręcić nakrętkę przegubu … read on

FRONT SUSPENSION

The front suspension of the Fiat Uno consists of Mc Pherson struts and lower wishbones attached to the support beam, which in turn is bolted to the body.

The suspension strut consists of a telescopic shock absorber, springs and upper supports, która stanowi również miejsca prowadzenia … read on

The gearbox and main gear form one unit, with which the driveshafts are closely related. The box is delivered in four versions- and five-speed gears. The basic structure of both crates is the same, except that the 5-speed gearbox has an extra pair of gears under the tailgate for overdrive. Piasta synchronizatora … read on

Clutch repair

Use force to exert pressure 85 kG (85 And) on the diaphragm spring, which should move the release bearing by 8 mm and the pressure ring by at least 1.4 mm .

To check clutch plate side runout, it should be mounted on the shaft in the lathe, powoli obracać … read on