automotive, cars
Wheel bearing replacement
Front wheel bearing, which is loud or has a lot of slack. needs to be replaced. It is recommended to replace the bearing together with the hub, as it is a simpler repair and requires no special tools (the clamping nut of the outer ring of the bearing has an inner hexagon).
■ Wymontować kolumnę zawieszenia … read on
Demolition of the suspension – Fiat Uno
■ Clamp the suspension strut in a vice near the steering knuckle arm.
■ Disconnect the crossover from the column.
■ Unscrew the brake caliper.
■ Unscrew the brake disc from the hub and remove it
■ Unscrew the metal cover of the brake disc from the steering knuckle.
■ Odkręcić nakrętkę przegubu … read on
FRONT SUSPENSION
The front suspension of the Fiat Uno consists of Mc Pherson struts and lower wishbones attached to the support beam, which in turn is bolted to the body.
The suspension strut consists of a telescopic shock absorber, springs and upper supports, która stanowi również miejsca prowadzenia … read on
The gearbox and main gear form one unit, with which the driveshafts are closely related. The box is delivered in four versions- and five-speed gears. The basic structure of both crates is the same, except that the 5-speed gearbox has an extra pair of gears under the tailgate for overdrive. Piasta synchronizatora … read on
Clutch repair
Use force to exert pressure 85 kG (85 And) on the diaphragm spring, which should move the release bearing by 8 mm and the pressure ring by at least 1.4 mm .
To check clutch plate side runout, it should be mounted on the shaft in the lathe, powoli obracać … read on
The clutch connects the engine to the gearbox and enables gear changes and starting. The Fiat Uno is equipped with a dry clutch, single disc with central spring.
Clutch replacement
The clutch can be disassembled after taking the gearbox out of the car
■ Zaznaczyć rysikiem wzajemne położenie oprawy sprzęgła i … read on
The exhaust system consists of an exhaust manifold, silencers and connecting pipes. Its task is to reduce the combustion noise to the value required by the standards and to create a specific pressure of flue gas accumulation. This pressure is necessary for the operation of the internal combustion engine.
Dlatego też układ wydechowy musi być na całej … read on
Checking the radiator fan
The radiator rests on rubber supports and can be removed upwards. An electric fan is located on the rear wall of the radiator to support the cooling effect when stationary and when driving slowly. The fan operation is controlled by a thermal switch screwed into the radiator. Włączenie pierwszego stopnia pracy … read on